Portable and simple particle counter. Only few minutes are needed to get measurement result. User only need to attache 2 tubes and press a button. Despite particles in oil or diesel it is also possible to measure water saturation of the tested fluid. Nothing additionally needs to be done - all measurements are made through those 2 tubes. Results are shown on the screens. Amount of particles is shown according ISO/NAS/SAE standard and water saturation in percent.

Standard set: 0,6 m suction tube fitted with 270 micron strainer (8mm OD), 0,6m discharge tube (8mm OD), Battery charger, PC software, USB data transfer cable, Manual.

Displayed information: ISO 4406, SAE AS4059 & NAS 1638, Relative Humidity (RH%)
Internal Memory: 512 lines of data (8.5 hours)
Case: HPX high performance resin construction with press & pull latches and durable soft-grip handles.
Nominal Battery Voltage: 15,0 VDC
Charge Voltage: 16,8 VDC
Capacity: 5,2 Ah
Charge time: 2 hours (80%) 5 hours (100%)
Modes of operation: Tank sampling; Bottle sampling (200 ml minimum sample bottle recommended)
Cleanliness standards: ISO 4406, NAS 1638 and SAE AS4059 and % RH of water sample
Pump type: Gear pump
Duty cycle: Continuous
Datalogging: Logging to internal memory transferred to USB stick as .csv file
Viscosity Range: 1 cSt ... 320 cSt
Fluid compatibility: Oil (hydraulic, lubrication, mineral and synthetic)
Fluid temperature: -10°C ... 55°C (oils)
Connections: 1604 minimess test points, with 0.6 m. long 8 mm tubing
Pressure: 2,5 bar max
Environmental: Lid closed: IP67; Lid open: IP54
Maximum humidity: 97% relative humidity, non condensing